Box diamond plated tool

At home, Joe measured the dimensions needed to fit the trailer frame. Then, using a carbide tipped wood blade on a circular saw, he cut a piece of treadplate to use as a baseplate and template to determine the angles and shape for the box. To create the in. Then he used an angle grinder to clean up and soft the score marks. With the help of a strip of 2x2-in. After completing the bending process, he measured and cut the strip to the exact length needed to create the back wall of the box.

Housing the aluminum weld wire in a spool on the back of the gun is preferred due to its softness. In some cases, he actually burned through the aluminum in spots, and he had to go back over some of the earlier welds after improving his technique.

Holding the sides together with a clamp, first, he tack welded the sides and base in spots. Even though the sides were made of one continuous piece of treadplate, Joe needed to weld the length of each corner because the scoring and bending process compromised their strength.

He also welded the sides to the bottom of the box. Get the job done with the perfect diamond plate toolbox. This tool box from UWS features superior weather protection and security thanks to its one-piece welded construction, MicroSeal gasket, and stainless steel locking handles.

It can be operated from either side of the truck and features two tool trays, screwdriver holders, and three sliding trays. A low profile prevents this tool box from making your bed appear bulky and misshapen.

Inside the box, BedRug lining is used to prevent contents from shifting around while you drive. Synchronized locks allow the tool box to be opened and closed from either side of your truck.

It sits between your bed rails while still providing exceptional security and weather protection for your tools and other small cargo. Connection: Offline. Select year. Select make. Select model. Select bed. Shop Now. RapidShip Only. I recently picked up a wool polishing kit with a drill attachment on eBay for around 15 bucks. Once you have your wool pad and device, you will want to turn the pad sideways to really clean in the grooves of the diamond plate when polishing.

You can use find aluminum polish like the Flitts brand here on Amazon that you can apply directly to the surface with a paintbrush. Another alternative that really does a good job if you have a polisher is a rouge polishing or cutting block. This is used to polish jewelry and works well on aluminum.

You will probably find there is quite a bit of black or gray smudgy substance on the outside of your tool box after polishing it, which is perfectly normal. Just hit with multipurpose cleaner or soap and water and a microfiber towel.

This is can be a dirty process when polishing, so just be sure to protect your clothes and be aware of your surroundings. Polishing or cleaning aluminum can really stand out and is a simple upsell that you can offer customers if you are a detailer.

I hope this post is helpful, and let me know if you have any other tips and tricks for polishing or protecting your tool box. Let me know how your project goes! What You Will Need There are a few things that are important to have on hand whenever tackling a project like this, including a couple of hours of your time for starters.